Linksys Cloud Manager 2.0 - Configuring the IP address of the Linksys Business Cloud Access Point

The Linksys Business Cloud Access Points allow you to remotely manage organizations, access points, and networks through the Linksys Cloud Manager 2.0.
 
By default, access points are set as DHCP clients. This article will guide you on how to configure the IP address of the access point. 

1. Log in to the Linksys Cloud Manager 2.0. For instructions, click here.

2. Select an organization. If there's only one organization, you will automatically have access to the Linksys Cloud Manager. If there are two or more, select and enter one. 

3. From the Networks tab, select a network, click on the three-dot icon, and then click on Devices.
 
sf46901-001_en_v3.png
 
4. From the Devices tab, select an access point, click on the three-dot icon, and then click on TCP/IP.
 
sf46901-002_en_v3.png
  
5. On the TCP/IP page, click Edit.
 
sf46901-003_en_v3.png

6. Choose the setting as needed for your network in the Configure IP field and configure your settings accordingly.
 
  • Use DHCP – obtain an IP address automatically
  • Use DHCP with Custom DNS – obtain an IP address automatically but set the settings for the primary and secondary DNS
  • Manual – enter the settings for the gateway, subnet mask, and primary and secondary DNS
     
sf46901-004_en_v3.png
 
7. Click on Save.

You have now configured the IP address on the access point. To learn more about the Linksys Cloud Manager 2.0, click on the following links:
 

Linksys Cloud Manager 1.0 to 2.0 Migration Guide
Linksys Cloud Manager 2.0 – Getting Started Guide

Was this support article useful?

Additional Support Questions?
Search Again