Linksys E3200 FAQs



HARDWARE INFORMATION
What is the Linksys E3200?The Linksys E3200 is a Linksys Wireless-N router that allows you to access the internet via a WiFi connection or through one of its four ethernet ports. The router’s USB port connects to a USB storage device, so you can add storage space to your network using a USB hard drive or access your portable files using a USB flash disk. For more WiFi bandwidth, the router can create two simultaneous yet separate Wireless-N networks, one using the 5 GHz radio frequency band and one using the 2.4 GHz band.
What are the default IP address, username, and password of the Linksys E3200?The default IP address is 192.168.1.1 and the username and password are both "admin".
How can I reset the Linksys E3200 to factory defaults?sf47505-003_en_v2.png
What is the warranty period for the Linksys E3200?

The warranty period is dependent on the country of purchase.

Can I use a USB 2.0 hard drive on the USB port?Yes. The Linksys E3200 USB port supports FAT32, NTFS, and HFS+ journaled and non-journaled data-storing formats.
How much power can the Linksys E3200 USB port supply to devices?The Linksys E3200 USB port supplies up to 1000mA power on devices. 
Does the Linksys E3200 support remote management?Yes.
Where are the light indicators located on the Linksys E3200?The light indicators are at the back of the router.
Does the Linksys E3200 support dual or multiple voltages?Yes. The Linksys E3200 supports dual or multiple voltages in the range of 100-240 volts.
Where can I find the power specifications of my Linksys E3200?The power specifications of your Linksys E3200 can be found on the power adapter plug.

WIFI AND NETWORK SECURITY
What is the router's default SSID?

The default SSID of the Linksys E3200 is LinksysXXXXX (where the XXXXX is the last five digits of the router’s serial number, which is found on the bottom). You have to upgrade your firmware to have LinksysXXXXX as your default SSID.

What are the supported security modes of Linksys E3200?The router supports the following WiFi security options: WPA2â„¢/WPAâ„¢ Mixed Mode, WPA2 Personal, WPA Personal, WPA2 / WPA Enterprise Mixed Mode, WPA2 Enterprise, WPA Enterprise, WEP, and RADIUS.
Does Linksys E3200 allow VPN tunnels using IPSec, L2TP, or PPTP protocols to pass through the router?
Yes.
Does the Linksys E3200 support DMZ?Yes.
Does the Linksys E3200 support Stateful Packet Inspection (SPI) firewall?Yes.
What is the maximum number of URL addresses can each Parental Controls policy block?Parental Controls can block up to eight URL addresses.

TROUBLESHOOTING

Can I back up and restore the settings on the Linksys E3200?
Yes.
How do I turn the WiFi function of my router ON or OFF?To turn the WiFi function of the router ON or OFF, you will need to access the web interface of your router and click on the Wireless tab. Under the Basic Wireless Setting, set the Network Mode of both your 5 GHz and 2.4 GHz to Disabled. You can view the settings using your computer. 

FIRMWARE UPDATE
How do I upgrade the firmware of the Linksys E3200?

sf47505-004_en_v2.png

If your router has a storage link and your storage device is connected to it, make sure to remove the storage device before you proceed in upgrading the router’s firmware as this may result in data loss. Make sure also that you have created a backup configuration before removing the storage device.


SPECIAL FEATURES
What DDNS providers does the Linksys E3200 support?It supports DynDNS.org and TZO.com.
How many static routes can I set up between the router and another network?
 
You can have up to 20 static routes.
Does the Linksys E3200 support AP Isolation? No.
Does the Linksys E3200 have a built-in FTP server? Yes. You will be able to create an FTP server that can be accessed from your local network or the internet.
Can I share the disk attached to my Linksys E3200? Yes.
Does the Linksys E3200 support WiFi Quality of Service (QoS) and Internet Access Priority QoS? Yes.
Does Linksys E3200 support transmitting log information to a log server? No.
What is Port Forwarding? The Port Forwarding feature allows you to set up public services on your network, such as web servers, FTP servers, email servers, or other specialized internet applications.
Can I select specific time zones and automatically adjust the clock? Yes.
Which dynamic route protocol is supported on the Linksys E3200? It's compatible with the RIP/RIPv2 dynamic route protocol.
Can I configure Parental Controls features using the web interface? sf47505-005_en_v2.png
Can I configure Guest Access features using the web interface? sf47505-006_en_v2.png
How many internet connection types does the Linksys E3200 support? The router supports six internet connection types: Automatic Configuration - DHCP, Static IP, PPPoE, PPTP, Telstra Cable, and L2TP.

Was this support article useful?

Additional Support Questions?
Search Again