Linksys EA8100 Frequently Asked Questions

TABLE OF CONTENTS
 
HARDWARE INFORMATION

WIRELESS CONNECTION AND SECURITY
 

ADVANCED CONFIGURATION
 
 


HARDWARE INFORMATION
 

1.  What is the Linksys EA8100 Max-Stream™ AC2600 Gigabit WiFi Router?
 
The Linksys EA8100 Max-Stream™ AC2600 Gigabit WiFi Router is a dual-band router that supports speeds of up to 800 Mbps for the 2.4 GHz and 1733 Mbps for the 5 GHz band.  To know more about the Linksys EA8100, click
here.
 

2.  What is the warranty period of the Linksys EA8100?
 
The warranty period of the Linksys EA8100 is 3 years.


3.  Where can I find the router’s serial number?
 
The router’s serial number is printed on the label located at the bottom part of the device.  You can also locate this via the web-based setup page on the Troubleshooting > Status > Report Tool.
 

4.  What USB standards does the Linksys EA8100 support?
 
The Linksys EA8100 has both USB 2.0 and USB 3.0 ports which are capable of supporting an external hard disk or flash drive with up to 1100mA current draw.  These ports support FAT, FAT32, NTFS and HFS+ journaled and non-journaled file systems.


5.  What is the Network Map feature of my Linksys EA8100?
 
The Network Map feature of your Linksys EA8100 allows you to manage and monitor your devices’ connection to the network. 

SETUP AND INSTALLATION
 

1.  How do I set up the Linksys EA8100?
 
To know how to set up the Linksys EA8100, click
here.
 

2.  What is the default IP address and password of the Linksys EA8100?
 
The default IP address for this router is 192.168.10.1 and the default password is admin.
 

3.  How do I set up my Linksys EA8100 to Bridge Mode using my Linksys cloud account?

To learn how to set up the Linksys EA8100 to Bridge Mode, click here.

To learn how to configure your Linksys EA8100 to Wireless Repeater mode, click here.

5.  What is the Wireless Scheduler feature of my Linksys EA8100 and how can I use it?

The Wireless Scheduler feature of your Linksys EA8100 allows you to turn OFF or ON the Wi-Fi, including the Guest networks at chosen times.  To know more about this, click here.

FIRMWARE UPGRADE
 

1.  How do I upgrade the firmware on the Linksys EA8100?
           
The Auto Firmware Update feature allows your router to automatically update whenever there is a new firmware available.  By default, this feature is enabled on the Linksys EA8100.  If you want to disable auto updates, click
here. 
 
WIRELESS CONNECTION AND SECURITY
 

1.  What Wi-Fi security modes do the Linksys EA8100 support?

The Linksys EA8100 supports WEP, WPAâ„¢-Personal, WPA2â„¢-Personal, WPA2 Enterprise, WPA2 / WPA Mixed Personal and WPA2 / WPA Mixed Enterprise security modes.
 

2.  Which Wi-Fi connection standards and frequencies are supported by the Linksys EA8100?
 
The Linksys EA8100 is compatible with 802.11ac, 802.11b, 802.11g, 802.11n and 802.11a.  It supports the 2.4 GHz and 5 GHz frequencies.
 

3.  How do I connect a wireless device to the Wi-Fi of the Linksys EA8100?
 
To connect wireless devices to the network, you’ll need to know your Wi-Fi settings such as the Wi-Fi name and password. .
 

4.  Where can I see the default Wi-Fi name and password of the Linksys EA8100?
 
The default Wi-Fi name and password can be located at the bottom label of the Linksys EA8100.
 

5.  How many Guest networks can I set up on my Linksys EA8100?
 
The Linksys EA8100 allows you to have two Guest networks, one for each band (2.4 GHz and 5 GHz).  With these, your visitors at home can access the internet but not the local network (i.e., shared storage devices, printer access).
 
NOTE:  The router supports up to 50 guests.
 
ADVANCED CONFIGURATION
 

1.  Is the router compatible with DLNA® devices?
           
Yes.


2.  Does the Linksys EA8100 allow VPN tunnels using IPSec, L2TP or PPTP protocols to pass through the router?
 
Yes.  The Linksys EA8100 allows VPN tunnels using IPSec, L2TP or PPTP protocols to pass through the router.
 

3.  Does the Linksys EA8100 offer a Filter IDENT that blocks specific internet data types?
 
Yes, this feature keeps port 113 from being scanned by devices outside of your local network.
 

4.  What is Demilitarized Zone (DMZ) and what is it used for?
 
The DMZ screen allows one local user to be exposed to the internet for use of a special-purpose service such as internet gaming and video conferencing.  DMZ hosting forwards all the ports at the same time to one computer.  Port Forwarding is more secure because it only opens the ports you want to open.
 

5.  What DDNS providers does the Linksys EA8100 support?
 
The Linksys EA8100 supports Dyn.com and NO-IP DDNS providers.
 

6.  Is the Linksys EA8100 DFS-certified?
 
Yes.  The Linksys EA8100 features the Dynamic Frequency Selection (DFS), a mechanism designed to allow wireless routers to operate on the 5 GHz frequency band that is traditionally allocated to radar systems.


7.  Does this support IPv6 RD for its internet connection?

Yes. It supports IPv6 RD and 6to4 tunneling.


TROUBLESHOOTING

1.  How can I reset the Linksys EA8100 to factory defaults?
 
There are two ways to reset the Linksys EA8100 to factory defaults:
  • Hardware Reset – Press and hold the Reset button on the back panel of the Linksys EA8100 for about 10 seconds.
  • Software Reset – Log in to your Linksys Cloud Account.  Under Router Settings, click Troubleshooting > Diagnostics.  Click Reset under Factory reset.
To know how to set up the Linksys EA8100, click here.
 
3.  What should I do if I can't connect to the internet wirelessly and my Wi-Fi name is not listed in the Available Networks?
 
To resolve this issue, click 
here.

4.  Can I also block HTTPS websites in Parental Controls?
 
Yes, website addresses starting with https:// can be blocked but, because they have encryption, the Linksys Smart Wi-Fi cannot redirect you.  Instead of a page telling you the address has been blocked, you will see a browser error page.

Was this support article useful?

Additional Support Questions?
Search Again