Linksys RE6250 Frequently Asked Questions

TABLE OF CONTENTS
 
HARDWARE INFORMATION
 

1. What is the Linksys RE6250 AC750 Wi-Fi Range Extender?
2. What is included in the Linksys RE6250 package?
3. What are the parts of the Linksys RE6250?
4. What does the Power / WPS light on the Linksys RE6250 indicate?
5. What is the warranty period of the Linksys RE6250?
6. What are the product requirements of my Linksys RE6250?
 
SETUP & INSTALLATION
 
1. How do I set up the Linksys RE6250?
2. Can I set up the Linksys RE6250 using a smart phone device or tablet?
3. What is the default IP address and password of the Linksys RE6250?
4. How do I set up my Linksys RE6250 using the Wi-Fi Protected Setupâ„¢ (WPS)?
5. Do I need to install Setup Software on my computer?
6. How do I reset my Linksys RE6250?
 
FIRMWARE UPGRADE
 
1. How do I upgrade the firmware of the Linksys RE6250?
 
WIRELESS CONNECTION & SECURITY
 
1. What wireless security modes does the Linksys RE6250 support?
2. Which wireless connection standards and frequencies are supported by the Linksys RE6250?
3. What is the maximum PHY Data Rate speed for each band?
4. What is the default wireless network name (SSID) of my Linksys RE6250?
5. Does the Linksys RE6250 support simultaneous dual-band (2.4 GHz and 5 GHz)?
6. What is Cross Band technology and does my Linksys RE6250 support it?
7. Where can I find the MAC address of my range extender for Wireless MAC Filtering?
8. Can I change the Extended Wireless Settings of my range extender?
9. How can I check if the Linksys RE6250 is connected to my existing wireless network?
10. I have multiple wireless routers or access points in my network, how can I tell which access point / wireless router my range extender is connected to?
11. Can I connect multiple wireless devices to my Linksys RE6250?
 
TROUBLESHOOTING
 
1. What should I do when I cannot connect the range extender to the router or access point?
2. What should I do when I cannot access the Linksys RE6250?
3. What should I do when I experience intermittent connection issues when connected to the Linksys RE6250?
 

HARDWARE INFORMATION
 
1. What is the Linksys RE6250 AC750 Wi-Fi Range Extender?
 
The Linksys RE6250 AC750 Wi-Fi Range Extender is a plug-in range extender that expands the range of your wireless home network up to 6500 sq. ft.  With the range extender's simultaneous wireless dual-band connectivity, eliminate dead spots and enjoy streaming, playing online games, and browsing the web without interruptions.  To know more, click here.
 
2. What is included in the Linksys RE6250 package?
 
The following items are included in the Linksys RE6250 package:
  • One Linksys RE6250
  • Quick Start Guide
  • Regulatory Information Booklet
3. What are the parts of the Linksys RE6250?
 
The Linksys RE6250 has the following parts:
  • Wi-Fi Protected Setupâ„¢ (WPS) button
  • Power / WPS light indicator
  • Reset button
4. What does the Power / WPS light on the Linksys RE6250 indicate?
 
Power LightStatus / Description
Blinking Green
  • Starting up
  • Resetting to factory defaults
  • Upgrading firmware
Solid Green
  • Ready to use
Solid Orange
  • Weak connection with the router
Fix:  Unplug the range extender, and move it closer to the router.
Blinking Orange
  • Not connected to the router or other error
    • Make sure your router has an internet connection and Wi-Fi is turned ON.
    • If the router is in order, unplug the range extender, move it closer to the router, plug it back in, wait for one minute, and reconnect to your network.
  • ​​​WPS pairing failed
 
 
5. What is the warranty period of the Linksys RE6250?
 
The warranty period is dependent on the country of purchase.  For more information about your device’s warranty, click here.
 
6. What are the product requirements of my Linksys RE6250?
 
The product requirements are:
  • Existing wireless router or access points
  • A Windows® or a Mac® computer, or a tablet / smartphone with Wi-Fi capability
  • AC power outlet
  • Browsers:
  • Internet Explorer® 8 or higher
  • Safari® 5.1 for Mac® or higher
  • Google Chromeâ„¢ 25.0 or higher
  • Firefox® 20 or higher
SETUP & INSTALLATION
 
1. How do I set up the Linksys RE6250?
 
Setting up the Linksys RE6250 is made fast and easy because of its CD-less setup.  Now you can run the setup from a web browser even if your device does not initially have an internet connection and is on factory settings.  Click here to learn how to set up the Linksys RE6250.
 
2. Can I set up the Linksys RE6250 using a smart phone device or tablet?
 
Yes.
 
3. What is the default IP address and password of the Linksys RE6250?
 
If the Linksys RE6250 does not detect a Dynamic Host Configuration Protocol (DHCP) server in your network and has not obtained an IP address from a router, its default IP address is 192.168.1.1.  The default password is admin.
 
4. How do I set up my Linksys RE6250 using the Wi-Fi Protected Setupâ„¢ (WPS)?
 
To learn on how you can set up the range extender using WPS, click here.
 
5. Do I need to install Setup Software on my computer?
 
No.
 
6. How do I reset my Linksys RE6250?
 
To reset the Linksys RE6250 to its factory defaults, press and hold the Reset button for 10 seconds. 
 
FIRMWARE UPGRADE
 
1. How do I upgrade the firmware of the Linksys RE6250?
 
There are two ways to upgrade the Linksys RE6250:  either through Auto update or Manual update.  For detailed instructions on how to do these, click here.
 
WIRELESS CONNECTION & SECURITY
 
1. What wireless security modes does the Linksys RE6250 support?
 
The Linksys RE6250 supports WEP, WPA™, WPA2™, and WPA2 / WPA Mixed Mode security types.  

2. Which wireless connection standards and frequencies are supported by the Linksys RE6250?
 
The Linksys RE6250 supports 802.11b, 802.11g, 802.11n, 802.11a, and 802.11ac standards.  It also supports the 2.4 GHz and 5 GHz frequencies simultaneously.
 
3. What is the maximum PHY Data Rate speed for each band?
 
The maximum wireless speed for the 2.4 GHz band is 300 Mbps and the maximum wireless speed for the 5 GHz band is 433 Mbps.
 
4. What is the default wireless network name (SSID) of my Linksys RE6250?
 
The default SSID of your Linksys RE6250 is Linksys Extender Setup.
 
5. Does the Linksys RE6250 support simultaneous dual-band (2.4 GHz and 5 GHz)?
 
Yes. 
 
6. What is Cross Band technology and does my Linksys RE6250 support it?
 
Yes, the Linksys RE6250 supports Cross Band technology.  This technology maximizes simultaneous use of both bands (2.4 GHz and 5 GHz) for high speed data transfer and uninterrupted streaming and gaming.
 
7. Where can I find the MAC address of my range extender for Wireless MAC Filtering?
 
You can find the wireless MAC address of your range extender in its web-based setup page.  Go to Status > WLAN Statistics > Extender MAC address and look for Seen by Upstream AP.  For detailed instructions, click here.

8. Can I change the Extended Wireless Settings of my range extender?
 
Yes.  To learn how to change the Extended Wireless Settings, click here.
 
9. How can I check if the Linksys RE6250 is connected to my existing wireless network?
 
To check if the Linksys RE6250 is connected to your network, access the range extender’s web-based setup page.  Then, under Wireless, click Basic Settings > Status. 
 
10. I have multiple wireless routers or access points in my network, how can I tell which access point / wireless router my range extender is connected to?
 
To know which access point or wireless router your Linksys RE6250 is connected to, access the range extender’s web-based setup page.  Under Status, click WLAN Statistics then check the AP MAC address section.  Take note of this address as this is the Mac address of the access point or wireless router your Linksys RE6250 is connected to. 
 
11. Can I connect multiple wireless devices to my Linksys RE6250?
 
Yes, the Linksys RE6250 acts as an extension to your router or access point so you can connect multiple devices to it.
 
TROUBLESHOOTING
 
1. What should I do when I cannot connect the range extender to the router or access point?
 
Here are some things you can do:
  • Make sure you are using the same wireless network name and wireless password as your existing wireless router or access point.
  • For first-time setup, you may need to place the extender closer to the router.  After you’ve set up your extender, you can unplug it and move it to the final location.
  • To reduce signal obstructions, try alternate locations for the router and extender.
  • Avoid placing the router and extender near metal objects, masonry walls, and reflective surfaces such as glass or mirrors.
  • Avoid placing the router and extender near other electronics that may cause signal interference.
  • If you’re using WPS to connect, wait until the WPS indicator stops blinking before trying to make the connection again.
 2. What should I do when I cannot access the Linksys RE6250?
 
If you cannot access the Linksys RE6250, try any of the following troubleshooting methods:
  • Make sure you are connected to the Extended wireless network name of your extender
  • Powercycle the extender.
  • Move the extender closer to your router.
  • Look up the extender’s IP address on your router’s DHCP Client Table and try to ping it.
  • Reset extender and go through the setup again.
For more detailed information, click here.
 

3. What should I do when I experience intermittent connection issues when connected to the Linksys RE6250?
 
Make sure that your range extender is getting at least 50 percent of your router’s Wi-Fi signal and is located midway between your router and the area without Wi-Fi.  To check your range extender’s wireless signal, access its web-based setup page and click Status > WLAN Statistics > Signal Strength.

 

Was this support article useful?

Additional Support Questions?
Search Again