Linksys EA7450 MAX-STREAM Dual-Band WiFi 5 Router Frequently Asked Questions

TABLE OF CONTENTS
 
HARDWARE INFORMATION

1. 
What is the Linksys EA7450 MAX-STREAM® Dual-Band WiFi 5 Router?
2.  What are the features of the Linksys EA7450?
3.  What USB standard does the Linksys EA7450 support?
4.  What can I connect to the USB port of the router?
5.  What are the minimum system requirements of the Linksys EA7450?
6.  How many antennas does the Linksys EA7450 have?
7.  Are the antennas detachable?
8.  What is the preferred antenna positioning for the Linksys EA7450?
9.  Can I wall mount the router?
10.  What processor does the Linksys EA7450 have?

SETUP AND INSTALLATION

1. 
How do I set up the Linksys EA7450?
2.  Can I set up my router using my smartphone or tablet?
3.  What are the default settings of the Linksys EA7450?

WI-FI CONNECTION AND SECURITY

1. 
What is the maximum PHY data rate for each Wi-Fi band?
2.  How do I configure Parental Controls?
3.  How many Guest Wi-Fi can I set up on my Linksys EA7450?

ADVANCED CONFIGURATION

1. 
Does the Linksys EA7450 allow VPN tunnels using IPSec, L2TP or PPTP to pass through the router?
2.  What DDNS providers does the Linksys EA7450 support?
3.  Does the Linksys EA7450 support Seamless Roaming?
4.  Does the Linksys EA7450 support Wireless Repeater or Wireless Bridge mode?
5.  Does this support IPv6 RD for its internet connection?

TROUBLESHOOTING

1. 
How can I reset my router to factory defaults?
2.  How do I upgrade my router’s firmware?
 

HARDWARE INFORMATION
 
1.  What is the Linksys EA7450 MAX-STREAM® Dual-Band WiFi 5 Router?

The Linksys EA7450 MAX-STREAM® Dual-Band WiFi 5 Router offers ample bandwidth for simultaneous video streaming, online gaming, and other data-heavy activities.  The router’s two dedicated bands help minimize lag even when multiple devices are connected.  For additional information on the Linksys EA7450, click here.

2.  What are the features of the Linksys EA7450?

The Linksys EA7450 has the following features:
  • Dual-Band
  • 802.11ac AC1900
  • Linksys Smart Wi-Fi
  • Beamforming technology
  • Seamless Roaming
  • Speeds of up to 1.9 Gbps
    • Up to 300 Mbps on the 2.4 GHz radio
    • Up to 1600 Mbps on the 5 GHz radio
  • 2x4 simultaneous data streams for stronger and faster performance
  • One USB 3.0 port for sharing a hard drive or USB printer
  • Four Gigabit ethernet ports
  • One Gigabit internet port
  • Dual-core processor
  • Wall-mountable
  • Input power:  12V, 2A 
For additional information on the Linksys EA7450, click here.

3.  What USB standard does the Linksys EA7450 support?

The Linksys EA7450 has one USB 3.0 port that can support an external hard disk or flash drive with up to 1100 mA current draw.

4.  What can I connect to the USB port of the router?

You can connect an external USB hard drive or a USB printer to share your printer in the network.

5.  What are the minimum system requirements of the Linksys EA7450?

The Linksys EA7450 has the following minimum system requirements:

 
  • A computer (Windows® or Mac®), smartphone or tablet
  • For browser setup, the latest version of:
  • Google Chromeâ„¢
  • Mozilla Firefox®
  • Safari® 
  • Microsoft Edge®
  • Internet Explorer® 8 or newer

6.  How many antennas does the Linksys EA7450 have?

The Linksys EA7450 has three external, dipole, and adjustable antennas.

7.  Are the antennas detachable?

No.  All three antennas are non-detachable.

8.  What is the preferred antenna positioning for the Linksys EA7450?

It is recommended to position all the antennas straight up.

9.  Can I wall mount the router?

Yes, the Linksys EA7450 is wall-mountable.

10.  What processor does the Linksys EA7450 have?

The Linksys EA7450 has a dual-core processor. 


SETUP AND INSTALLATION
 
1.  How do I set up the Linksys EA7450?

Setting up the Linksys EA7450 is made fast and easy using the Smart Setup Wizard.  To learn how, click here.

2.  Can I set up my router using my smartphone or tablet?

Yes, you can use a smartphone or a tablet to set up your router.  For step-by-step instructions, click here.

3.  What are the default settings of the Linksys EA7450?

The Linksys EA7450 has the following default settings:
  • Default IP address is 192.168.1.1
  • Default password is admin
  • Default Wi-Fi names:
  • ​​Linksysxxxxx (for 2.4 GHz)
  • Linksysxxxxx_5GHz (for 5 GHz)
NOTE:  The xxxxx represents the last five digits of the router’s serial number.  Also, the default Wi-Fi credentials are on the label located at the bottom of the router.
  • Default Guest Wi-Fi names:
    • Linksysxxxxx_Guest (for 2.4 GHz)
    • Linksysxxxxx5GHz_Guest (for 5 GHz)
NOTE:  The xxxxx represents the last five digits of the router’s serial number.
  • The Guest Wi-Fi is disabled out of the box.  It will be enabled after the setup process is complete.

WI-FI CONNECTION AND SECURITY
 
1.  What is the maximum PHY data rate for each Wi-Fi band?

The Linksys EA7450 has PHY data rates of up to 300 Mbps on the 2.4 GHz radio and up to 1600 Mbps for the 5 GHz radio.

2.  How do I configure Parental Controls?

The Parental Controls feature allows you to block a device by a specific time or to restrict internet sites on specific devices for users within your network.  For instructions on how to use Parental Controls, click here. 

3.  How many Guest Wi-Fi can I set up on my Linksys EA7450?

The Linksys EA7450 can support up to 50 clients.  The router allows you to have two Guest networks, one for the 2.4 GHz band and one for the 5 GHz band.  With these, your visitors at home can access the internet, but not the local network (e.g., shared storage devices, printer access).


ADVANCED CONFIGURATION

1.  Does the Linksys EA7450 allow VPN tunnels using IPSec, L2TP or PPTP to pass through the router?

Yes, the Linksys EA7450 allows Virtual Private Network (VPN) tunnels using Internet Protocol Security (IPSec), Layer 2 Tunneling Protocol (L2TP) or Point-to-Point Tunneling Protocol (PPTP) to pass through the router.

2.  What DDNS providers does the Linksys EA7450 support?

The Dynamic Domain Name System (DDNS) feature of the Linksys EA7450 supports Dyn.com and NO-IP.com.

3.  Does the Linksys EA7450 support Seamless Roaming?

Yes.  All Linksys MAX-STREAM routers support Seamless Roaming.

4.  Does the Linksys EA7450 support Wireless Repeater or Wireless Bridge mode?

Yes, the Linksys EA7450 supports Wireless Repeater or Wireless Bridge mode configuration.  Click the links below to learn how:
 

Configuring the Wireless Repeater mode on most Linksys Smart Wi-Fi Routers
Configuring the Wireless Bridge Mode on most Linksys Smart Wi-Fi Routers

5.  Does this support IPv6 RD for its internet connection?

Yes. It supports IPv6 RD and 6to4 tunneling.


TROUBLESHOOTING
 
1.  How can I reset my router to factory defaults?

There are two ways to reset the Linksys EA7450 to factory defaults:
  • Hardware Reset – Press and hold the Reset button on the back panel of the Linksys EA7450 for about 10 seconds.
  • Software Reset – Log in to the router's web-based setup page then under Router Settings, click Troubleshooting > Diagnostics, and under Factory reset, click Reset.
 
2.  How do I upgrade my router’s firmware?

Upgrading the firmware of your router allows you to fully enjoy its complete features.  The upgrade can be done either manually or automatically.  The Linksys EA7450 has a Router Firmware Update feature that can be set to Automatic to update the router automatically whenever there is new firmware available.  Click on the links below for step-by-step instructions:

How to automatically update the firmware of the Linksys Smart Wi-Fi Routers
Manually upgrading a Linksys Smart Wi-Fi Router’s firmware

Was this support article useful?

Additional Support Questions?
Search Again