Setting up a Linksys MR20WH Classic Micro Router 6 using Bluetooth

The Linksys app provides an animated guide and automatically identifies the nodes to be set up, making the process secure, seamless, and simple.
 

Before you begin:

 
  • Download or update the latest Linksys app.
  • Parent node - The parent node is the Linksys Mesh router that will be connected to your modem or internet source.
  • Child node - The child node is an additional Linksys Mesh node/router that you can add to extend your WiFi network. 
  • Linksys MR20WH works with another Linksys MR20WH or any Linksys Intelligent Mesh product.
  • Learn about the light behavior of your Linksys Mesh system.
 

Directions

Note that images may vary depending on the operating system of the mobile device used for setup. An iOS device is used in this article.

1. First, gather all your equipment.

If you have more than one Linksys Mesh router to set up, make sure to gather all your equipment in the same room preferably as the modem or internet source. 

You will be able to relocate your child nodes after the setup is complete.

 
  • Gather all your Linksys Mesh routers or nodes.
  • Power adapters for each one
  • One ethernet cable

2. Remove the existing WiFi router.

What are you currently using as your WiFi network? 

a. I have a modem (non-WiFi) and a separate WiFi router or existing WiFi Mesh system: 
 
  • Remove your existing WiFi router and/or all your devices from the old WiFi Mesh system. 
  • Powercycle your modem.
  • Wait until your modem has rebooted and go to the next step.
 
b. I have a WiFi router and modem in one device:
 
  • Go to the next step
 
c. I do not have any WiFi routers or existing WiFi Mesh systems:
 
  • Go to the next step

3. Connect and power on your parent router.

If you have more than one, choose one of the routers then connect your modem to the Internet port on the Linksys router and power it ON. The light on the front will begin to blink in purple.


Parent router

sf50392-001_en_v1

4. Power ON your child nodes. Power ON all your child nodes near the parent node, no more than 10 ft from the parent node or preferably in the same room as the parent node. Make sure that no other cables are connected to any of the ports on the child nodes during setup.

Child router


sf50392-002_en_v1

5. Make sure that your mobile device isn’t connected to an existing WiFi network, then tap on Set up a New Wi-Fi Network.

sf50392-003_en_v1

6. Tap on Velop and Mesh Routers.

sf50392-004_en_v1

7. Turn ON Bluetooth® if prompted. Follow the on-screen instructions or swipe down then tap on the Bluetooth icon to enable it.

sf50392-005_en_v1

8. If you have already connected and powered ON your parent node/router to the modem, tap Next, then tap It’s connected.

If you haven’t done so, follow the wiring instructions and tap Next when you're ready.


sf50392-006_en_v1

sf50392-007_en_v1

9. If you have already powered ON your child nodes, tap Next.

If you haven’t done so, follow the wiring instructions, make sure to keep your child nodes close to your parent router (preferably no more than 10 ft), and tap Next when you are ready.


sf50392-008_en_v1

10. Make sure all your nodes have a solid purple light, then tap on Node light is solid. Keep your phone near the nodes while your nodes are being set up.

sf50392-009_en_v1

sf50392-010_en_v1

11. Internet checking will begin.

sf50392-011_en_v1

If an internet connection is not detected, you will come across the following screen, tap Next for instructions on restarting your modem, or if your internet connection requires your PPPoE settings or Static IP address, tap on Do you have ISP settings to enter. You can then select your internet connection type and enter your settings.

sf50392-012_en_v1

sf50392-013_en_v1

12. Customize your WiFi name and WiFi password. The WiFi password is case-sensitive. Tap Next once done.

sf50392-014_en_v1

13. Tap Continue when ready.

sf50392-015_en_v1

14. Log in with your existing Linksys cloud account to link your network to your cloud account. You can manage and monitor your network remotely from any mobile device.

If you haven’t created one, tap on Create account.


sf50392-016_en_v1

sf50392-017_en_v1

15. Wait while your network and/or child nodes are configured.

sf50392-018_en_v1

sf50392-019_en_v1

sf50392-020_en_v1

If you don’t have any child nodes to add, you may still see the Adding your child nodes screen, but you will be taken to the Your Network screen within a few seconds since there are no child nodes to add.

16. Once all your nodes have been configured, the following screen will display the number of nodes that were successfully detected and configured on your network. Tap Next.

You can rename your nodes after they have been set up.


Network with only a parent router:

sf50392-021_en_v1

Network with a parent and child node/router:

sf50392-022_en_v1

Missing a node?
 
  • If you have additional nodes to add but forgot to turn them ON at the beginning or if some of your child nodes were not detected, tap on Add more nodes to try again. Make sure to move them near the parent node, preferably in the same room as the parent node or no more than 10 ft away from the parent node. 
  • You can also tap Next to complete the setup process and add them later.
  • Learn more about troubleshooting tips on other possible messages.

17. Tap Next.

sf50392-023_en_v1

18. You can now unplug and relocate your child nodes. Tap Finish.

sf50392-024_en_v1

19. Your WiFi should now be ready. Tap on Go to dashboard.
 

sf50392-025_en_v1

Once you relocate your child nodes and power them back ON. The child nodes are ready and connected once they have a solid blue light. You can now connect your wireless devices to your WiFi.
 

Was this support article useful?

Additional Support Questions?
Search Again