Linksys EA7200 Max-Stream Dual-Band WiFi 5 Router Frequently Asked Questions

TABLE OF CONTENTS
 
HARDWARE INFORMATION

1. 
What is the Linksys EA7200 Max-Stream Dual-Band WiFi 5 Router?
2.  What are the features of the Linksys EA7200?
3.  What USB standard does the Linksys EA7200 support?
4.  What can I connect to the USB port of the router?
5.  What are the minimum system requirements of the Linksys EA7200?
6.  How many antennas does the Linksys EA7200 have?
7.  Are the antennas detachable?
8.  What is the preferred antenna positioning for the Linksys EA7200?
9.  Can I wall mount the router?
10.  What processor does the Linksys EA7200 have?

SETUP AND INSTALLATION

1. 
How do I set up the Linksys EA7200?
2.  Can I set up my router using my smartphone or tablet?
3.  What are the default settings of the Linksys EA7200?

WI-FI CONNECTION AND SECURITY

1. 
What is the maximum PHY data rate for each Wi-Fi band?
2.  How do I configure Parental Controls?
3.  How many radios does the Linksys EA7200 support?
4.  How many Guest Wi-Fi can I set up on my Linksys EA7200?

ADVANCED CONFIGURATION

1. 
Does the Linksys EA7200 allow VPN tunnels using IPSec, L2TP, or PPTP to pass through the router?
2.  What DDNS providers does the Linksys EA7200 support?
3.  Does the Linksys EA7200 support Seamless Roaming?
4.  Does the Linksys EA7200 support Wireless Repeater or Wireless Bridge mode?
5.  Does this support IPv6 RD for its internet connection?

TROUBLESHOOTING

1. 
How can I reset my router to factory defaults?
2.  How do I upgrade my router’s firmware?
 

HARDWARE INFORMATION
 
1.  What is the Linksys EA7200 Max-Stream Dual-Band WiFi 5 Router?

The Linksys EA7200 Max-Stream Dual-Band WiFi 5 Router offers advanced high-speed Wi-Fi to multiple devices at once.  This router lets everyone in your home stream videos and play games at the same time with no lag or buffering.  To learn more about the Linksys EA7200, click here.

2.  What are the features of the Linksys EA7200?

The Linksys EA7200 has the following features:
  • Dual-Band
  • 802.11ac AC1750 
  • Linksys Smart Wi-Fi
  • Up to 300 Mbps on the 2.4 GHz radio
  • Up to 1450 Mbps on the 5 GHz radio
  • 2x4 simultaneous data streams for stronger and faster performance
  • Dual-core processor
  • Three external adjustable antennas
  • Beamforming technology
  • Seamless Roaming
  • Input power:  12V, 2A
  • One Gigabit internet port
  • Four Gigabit ethernet ports
  • One USB 3.0 port for sharing a hard drive or USB printer
  • Linksys app support
To know more about the Linksys EA7200, click here.

3.  What USB standard does the Linksys EA7200 support?

The Linksys EA7200 has one USB 3.0 port that is capable of supporting an external hard disk or flash drive with up to 1100 mA current draw.

4.  What can I connect to the USB port of the router?

You can connect an external USB hard drive or a USB printer to share your printer in the network.

5.  What are the minimum system requirements of the Linksys EA7200?

The Linksys EA7200 has the following minimum system requirements:
  • A computer (Windows® or Mac®), smartphone or tablet
  • For browser setup, the latest version of the following:
  • Google Chromeâ„¢
  • Mozilla Firefox®
  • Safari® 
  • Microsoft Edge®
  • Internet Explorer® 8 or newer

6.  How many antennas does the Linksys EA7200 have?

The Linksys EA7200 has three, external, dipole, and adjustable antennas.

7.  Are the antennas detachable?

No.  The three antennas are non-detachable.

8.  What is the preferred antenna positioning for the Linksys EA7200?

It is recommended to position all the antennas straight up.

9.  Can I wall mount the router?

Yes, the Linksys EA7200 is wall-mountable.

10.  What processor does the Linksys EA7200 have?

The Linksys EA7200 has a dual-core processor. 


SETUP AND INSTALLATION
 
1.  How do I set up the Linksys EA7200?

Setting up the Linksys EA7200 is made fast and easy using the Smart Setup wizard.  To learn how, click here.

2.  Can I set up my router using my smartphone or tablet?

Yes, you can use a smartphone or a tablet to set up your router.  For step-by-step instructions, click here.

3.  What are the default settings of the Linksys EA7200?

The Linksys EA7200 has the following default settings:

 
  • Default IP address is 192.168.1.1
  • Default password is admin
  • Default Wi-Fi names:
  • ​​Linksysxxxxx (for 2.4 GHz)
  • Linksysxxxxx_5GHz (for 5 GHz)
NOTE:  The xxxxx represents the last five digits of the router’s serial number.  Also, the default Wi-Fi credentials are on the label located at the bottom of the router.
  • Default Guest Wi-Fi names:
    • Linksysxxxxx_Guest (for 2.4 GHz)
    • Linksysxxxxx5GHz_Guest (for 5 GHz)
NOTE:  The xxxxx represents the last five digits of the router’s serial number.
  • The Guest Wi-Fi is disabled out of the box.  It will be enabled after the setup process is complete.

WI-FI CONNECTION AND SECURITY
 
1.  What is the maximum PHY data rate for each Wi-Fi band?

The Linksys EA7200 has PHY data rates of up to 300 Mbps for the 2.4 GHz band and up to 1450 Mbps for the 5 GHz band.

2.  How do I configure Parental Controls?

The Parental Controls feature allows you to block a device by a specific time or to restrict internet sites on specific devices for users connected to your Wi-Fi.  To know how to configure Parental Controls, click here. 

3.  How many radios does the Linksys EA7200 support?

The Linksys EA7200 supports two radios, 2.4 GHz and 5 GHz.

4.  How many Guest Wi-Fi can I set up on my Linksys EA7200?

The Linksys EA7200 can support up to 50 clients.  The router allows you to have two Guest Wi-Fi, one for the 2.4 GHz band and one for the 5 GHz band.  With these, your visitors at home can access the internet, but not the local network (e.g., shared storage devices, printer access).


ADVANCED CONFIGURATION

1.  Does the Linksys EA7200 allow VPN tunnels using IPSec, L2TP, or PPTP to pass through the router?

Yes, the Linksys EA7200 allows Virtual Private Network (VPN) tunnels using Internet Protocol Security (IPSec), Layer 2 Tunneling Protocol (L2TP), or Point-to-Point Tunneling Protocol (PPTP) to pass through the router.

2.  What DDNS providers does the Linksys EA7200 support?

The Dynamic Domain Name System (DDNS) feature of the Linksys EA7200 supports Dyn.com and NO-IP.com.

3.  Does the Linksys EA7200 support Seamless Roaming?

Yes.  All Linksys Max-Stream routers support Seamless Roaming.

4.  Does the Linksys EA7200 support Wireless Repeater or Wireless Bridge mode?

Yes, the Linksys EA7200 supports Wireless Repeater or Wireless Bridge mode configuration.  Click the links below to learn how:
 

Configuring the Wireless Repeater mode on most Linksys Smart Wi-Fi Routers
Configuring the Wireless Bridge Mode on most Linksys Smart Wi-Fi Routers

5.  Does this support IPv6 RD for its internet connection?

Yes. It supports IPv6 RD and 6to4 tunneling.


TROUBLESHOOTING
 
1.  How can I reset my router to factory defaults?

There are two ways to reset the Linksys EA7200 to factory defaults:
  • Hardware Reset – Press and hold the Reset button on the back panel of the Linksys EA7200 for about 10 seconds.
  • Software Reset – Log in to the web-based setup page.  Under Router Settings, click Troubleshooting > Diagnostics.  Click Reset under Factory reset.
2.  How do I upgrade my router’s firmware?

Upgrading the firmware of your router allows you to fully enjoy its complete features.  The upgrade can be done either manually or automatically.  The Linksys EA7200 has a Router Firmware Update feature that can be set to Automatic to update the router automatically whenever there is new firmware available.  Click on the links below for step-by-step instructions:
 

How to automatically update the firmware of the Linksys Smart Wi-Fi Routers
Manually upgrading a Linksys Smart Wi-Fi Router’s firmware

Was this support article useful?

Additional Support Questions?
Search Again