The Linksys Smart Gigabit Switch (LGS308, LGS308P, LGS308MP, LGS318, LGS318P, LGS326, LGS326P, and LGS326MP) offers a quick and easy solution to extend your office network. You can reset the switch to factory defaults through its web-based setup page or by manually pressing the reset button on the device.
Manual reset
Using the web-based setup page
Manual reset
NOTE: The SYSTEM light will blink fast when the switch is ready to reset to factory defaults.
Step 2:
Release the button.
The switch will restore its configuration to factory defaults and restart itself.
Using the web-based setup page
Step 4:
Select Yes on the Restore to Factory Defaults option, then click Reboot to reset the switch to its default settings.
Step 5:
When the confirmation prompt appears, click OK to continue.
Related Article:
Restarting the Linksys Smart Gigabit Switch
Manual reset
Using the web-based setup page
Manual reset
Step 1:
Using a pin, press and hold the reset button for more than 10 seconds.
Using a pin, press and hold the reset button for more than 10 seconds.

NOTE: The SYSTEM light will blink fast when the switch is ready to reset to factory defaults.
Step 2:
Release the button.
The switch will restore its configuration to factory defaults and restart itself.
Using the web-based setup page
Step 1:
Access the switch’s web-based setup page. To learn how, click here.
Step 2:
On the web-based setup page, click the Maintenance tab.
Access the switch’s web-based setup page. To learn how, click here.
Step 2:
On the web-based setup page, click the Maintenance tab.

Step 3:
Click Reboot in the left panel.
Click Reboot in the left panel.

Step 4:
Select Yes on the Restore to Factory Defaults option, then click Reboot to reset the switch to its default settings.

Step 5:
When the confirmation prompt appears, click OK to continue.

Related Article:
Restarting the Linksys Smart Gigabit Switch