Getting to know the Linksys LAPAC1300CW-RTL

The Linksys LAPAC1300CW-RTL AC1300 Cloud Managed In-Wall AP TAA Compliant is designed for rooms and is built to fit within a single gang outlet mounted into a wall.  The Linksys LAPAC1300CW-RTL offers WiFi and two additional ethernet ports for connectivity.  One of the ports provides a PoE+ connection to power a PoE device such as a VoIP phone while the other gigabit port is intended to connect an ethernet device requiring gigabit speed.  To learn more about this product, click here. 
 
sf48102-001_en_v3.png

Product Features
 
  • Supports AC1300 dual-band 802.11ac
  • In-wall (wall plate) mount
  • 802.3af PoE and 802.3at PoE+-compliant 
  • 802.3af PoE Passthrough (requires 802.3at PoE+ input)
  • WPA2â„¢ and WPA2 Enterprise
  • Centralized cloud management feature
  • Customizable Captive Portal feature
  • Zero Touch Provisioning support
  • 802.11k/r Seamless roaming
  • Bandwidth limit per SSID and client
  • VLAN Tagging feature
  • Built-in DHCP server
  • 2x2 Spatial streams
  • Beamforming support
  • Supports up to eight SSIDs for each band (16 in total)
  • Supports Client Isolation feature
  • Supports Linksys Cloud Manager 2.0
  • 5-year warranty

Hardware
 
  • Weight:  363 g
  • Dimensions:  140 mm x 90 mm x 40 mm
  • Four internal antennas
  • One status indicator light
  • One Reset pinhole (located on the back panel).  Press and hold this button for 15 seconds to reset to factory default settings.  The indicator light will flash red once it has been reset.
  • A Power port (found on the bottom).  This is an optional port to supply power using an AC power adapter.
  • Three ethernet ports:
 
Port Description 

Ethernet 1 

sf48102-002_en_v3.png

This is an 802.3af/at PoE In port.  Power ON the access point using this port.
 
Ethernet 2 
sf48102-003_en_v3.png
 
This is an 802.3af PoE Out port.  This is a gigabit port that you can use to connect a PoE client device.  You can also connect a non-PoE wired device through this port.

NOTE:  Ethernet 1 must be powered ON by an 802.3at PoE+ connection in order for the Ethernet 2 port to provide output power to a PoE device.  You must also enable the PoE option through your Linksys Cloud Manager account.
.

 
Ethernet 3
sf48102-004_en_v3.png
 
This is a non-PoE gigabit port that you can use to connect an ethernet client device.
 
 
Product Requirements
 
  • Linksys Cloud Manager 2.0 account  
  • Browser:
  • Microsoft Edge® 42 later 
  • Google Chromeâ„¢ 67 or later 
  • Firefox® 60 or later 
  • Safari® 11 or later
 
Accessory

If you prefer placing your Linksys LAPAC1300CW-RTL on a stand rather than mounting it to the wall, a convenient solution is to use the Linksys LAPAC1300CWSTD (sold separately).
 
  • Dimensions:
  • Height:  180.5 mm 
  • Bottom:  75 mm x 94 mm
  • Weight:  75.4 g

sf48102-005_en_v3.png

Package Contents
 
  • One Linksys LAPAC1300CW-RTL access point
  • One stand for the access point (Linksys LAPAC1300CWSTD)
  • One 12V, 1A power supply with interchangeable plug
  • Quick start guide
  • CD with documents
  • One narrow bracket
  • One ethernet cable

Was this support article useful?

Additional Support Questions?
Search Again