Linksys EA7400 LED status indicators

The Linksys EA7400 Max-Stream AC1750 Gigabit Router is a 3x3 802.11ac dual-band Smart Wi-Fi router with one USB 3.0 and one USB 2.0 port. It supports data rates of up to 450 Mbps on 2.4 GHz and 1300 Mbps on 5 GHz networks.

Refer to the table below to know
what the EA7400 LEDs activity indicate:
LEDColorActivityDescription
Power
(Linksys logo)
WhiteOffPower off
Blinking (0.7 Hz)Booting/system diagnostic test/firmware upgrade
Blinking (1.67 Hz)Internet connection error
SolidConnected to the Internet
Wi-Fi Protected Setupâ„¢
(WPS)
GreenOffNo WPS activity
Blinking (1.0 Hz)WPS in progress. Up to two (2) minutes.
Blinking (2.0 Hz)WPS error or session overlap. Blinks for 15 seconds and then turns off.
Ethernet
(LAN)
Green (right) /
Yellow (left)
OffNo physical link on the port
Blinking (4.0 Hz)
(Yellow)
Data is transmitting through the port
Solid (Green)Physical link is up on the port
Internet
(WAN)
Green (right) / Yellow (left)OffNo physical link on the port
Blinking(4.0 Hz)
(Yellow)
Data is transmitting through the port
Solid
(Green)
Physical link is up on the port

Click the links below to know more about your device:

Getting to know the Linksys EA7400 Max-Stream AC1750 Gigabit Router
Linksys EA7400 Max-Stream AC1750 Gigabit Router Frequently Asked Questions

Was this support article useful?

Additional Support Questions?
Search Again