Linksys RE3000W v2 light behaviors

The Linksys RE3000W N300 Wireless Range Extender has a Light Emitting Diode (LED) on the front panel that gives you information about the device’s operation or behavior. 
Green / Orange
Power OFF
Green ON
Power ON / Device Ready
Green Blinking
Booting / Starting up (700 ms ON and 700 ms OFF until connection is established) / Firmware Upgrade
Green Blinking + Orange OFF (up to 120 seconds)
WPS in progress (priority)
• 1 second ON, 1 second OFF, continues until pairing succeeds or 2 minutes elapses, then it fails
Orange ON
WPS session overlap
• Weak signal on 2.4 GHz or 5 GHz connection
• Light continues to blink until adaptor is placed where Wi-Fi signal threshold is satisfactory on both band
Orange Blinking
• Blinking 1 second ON, 1 second OFF
• Bad connection w
ith the router (i.e. lost connection)
• In daily use, light continues 
until the problem is corrected or adapter is unplugged
Green (on the RJ45 connector)
• No physical link on the LAN port
• Physical link is up on the LAN port.  No data activity.
• Data is transmitting through the LAN port
WPS Light
Status / description
Blinking Green
When WPS connection is in process
Solid Green
When WPS connection is successful
Blinking orange for 2 minutes
When WPS cannot establish connection or encounters a problem
FIX:  Wait for a few seconds after the light stops blinking and try again

Related Articles:

Getting to know the Linksys RE3000W v2
RE3000W v2 Frequently Asked Questions
Setting up the Linksys RE3000W v2 N300 Wireless Range Extender

Was this support article useful?

Additional Support Questions?
Search Again