Setting up the Linksys SPNMX42BF-UK

This article will teach you how to set up the Linksys SPNMX42BF-UK.

Before you begin:
 
  • The Linksys SPNMX42BF-UK must be directly connected to BeFibre's modem. With the latest firmware, BeFibre now requires VLAN 10 which means that if the router is not connected to your BeFibre equipment it will not detect an internet connection.
  • The default WiFi name is BeFibre_xxxx where xxxx is the last four digits of the MAC address.
  • Admin password - Once the parent node has an internet connection, the default password will automatically change to the default WiFi password located on the product label. A node on factory defaults with no internet connection uses admin as the default password. After setting up, you can then link your network to your Linksys cloud account using the Linksys app to manage your network from anywhere.
  • Auto Configuration Server (ACS) support - This model supports Automatic Setup, meaning that once the node is plugged into BeFibre’s equipment, the node will automatically configure itself as a parent node and the internet settings. Once the light turns solid blue, the node is ready to use. Do not attempt to set up the node with the Linksys app, because it will not detect the node while it’s being set up.
  • Parent node - A parent node is the Linksys SPNMX42BF-UK connected to your modem.
  • Child node - A child node is another node used to extend your WiFi network. The child node can be wireless or wired. Although a node that is NOT from BeFibre may be added to your network (so long as it will be set up as a child node and not as the parent node), it is important to note that this node may not benefit from features that BeFibre offers. Contact BeFibre first.
 


Directions:
 
1. Connect an ethernet cable from your BeFibre modem's port to the internet port of the Linksys node.


sf47917-001_en_v2.png

2. Power ON your node and wait for the status light to turn solid purple, meaning it is ready for setup. The status light will then begin to flash white; this indicates that the node is going through an ACS setup. Wait until the status light is solid blue. This may take a few minutes. Once the status light is solid blue, the router is ready to use.

If the status light does not begin to flash in white and remains solid purple, make sure that your Linksys node is directly connected to your BeFibre equipment; otherwise, it will not connect to the internet. Also, make sure both devices are powered ON.
 
3. Now you can connect your mobile devices using the WiFi name and password located on the underside of the node.

Your node is now set up. To manage your node with the Linksys app, proceed to the steps below.


Linking your Linksys cloud account to the Linksys app

If you want to use the Linksys app to manage your settings from any mobile device, download the Linksys app for
Android™ or iOS devices, then link your network to your Linksys cloud account.

Steps and images may vary depending on the version of your Linksys app and the operating system of your mobile device. In the examples below, an iOS device is used. 

1. Connect your mobile device to the WiFi name you just created.

2. Launch the Linksys app and tap Manage Your Wi-Fi.


For Android, tap on Log in.

sf47917-002_en_v2.png

3. Either enter your existing Linksys cloud account credentials or tap Create an account and follow the on-screen instructions to create an account.

For Android, you will see Create an Email Login as an option.


sf47917-003_en_v2.png

4. Tap Add to Account.

sf47917-004_en_v2.png

5. The default router password for the Linksys SPNMX42BF-UK is the WiFi password located on its product label. Enter the WiFi password then tap Add to Account again. If you have customized the password, enter your password. 

sf47917-005_en_v2.png

You have now linked your network to your Linksys cloud account. You can now customize your admin password using the Linksys app.


Find out more:


Adding a child node to an existing Linksys Mesh system

Was this support article useful?

Additional Support Questions?
Search Again