Accessing the Linksys Velop Mesh router or node’s web interface while in bridge mode by IP address

To access the web interface of a Linksys Velop Mesh network while it is in Bridge mode is simple, you will need to determine the IP address of the parent node or router.

Below are the steps to access your parent node or router while it is in bridge mode by its IP address.

1. Open the Linksys app and
log into your account.

2. Tap the menu 
sf50919-001_en_v2.png icon located on the upper-left corner of the dashboard then tap on Network Administration.

sf50919-002_en_v2.png

3. Tap on the parent node which is the first node/router on the list and look for the IP Address under LAN.

sf50919-003_en_v2.png

sf50919-004_en_v2.png

4. Launch a desktop web browser then type in your router’s IP address then press [Enter]. Make sure that the computer being used is connected to the same network.

sf50919-005_en_v2.png

5. Enter your Router Password and click Sign In.

sf50919-006_en_v2.png

If you come across the following screen, click on For local access, click here.

sf50919-007_en_v2.png

You have successfully accessed the router’s web interface. 

sf50919-008_en_v2.png

Was this support article useful?

Additional Support Questions?
Search Again