Linksys LAPPI30W High Power Gigabit PoE+ Injector Frequently Asked Questions

1.  What is the Linksys LAPPI30W High Power Gigabit PoE+ Injector?

The Linksys LAPPI30W High Power Gigabit PoE+ Injector offers a quick and easy setup with plug and play installation.  It has Power over Ethernet (PoE+) capability that can provide up to 30W power supply.  It also reduces the wiring cost of AC power by using a standard CAT5, CAT5e or a preferred better cable that can carry both power and data to PoE devices.  To learn more, click here.

2.  Can the Linksys LAPPI30W power ON all Linksys PoE devices?

The Linksys LAPPI30W can power any PoE device up to 30W.

3.  Does this product requires any driver or software?

No.  There is no web interface, no firmware or drivers required.

4.  What is the warranty period of the PoE injector?

It has a 2-year limited warranty.

5.  What is the power supply capacity of the PoE injector?

Below is the power supply information for this product:
  • Input: 100-240V ~ 0.8A, 50-60 Hz

6.  What does the light in the PoE injector mean?
 
The power light turns green when the PoE injector is powered ON.

7.  What should I do if my PoE injector didn't turn ON?

Check if the power cord is connected to the PoE injector and if the power cord is connected to a power outlet.

8.  To which ports should I connect my PoE device and my LAN?

You can connect PoE devices such as a PoE access point to the PoE port as they can transmit power and data at the same time.  Connect a cable from your LAN port to your existing network such as a router or a switch.

Was this support article useful?

Additional Support Questions?
Search Again