Setting up the Linksys RE6350 using its browser based setup

Setting up the Linksys RE6350 AC1200 Wi-Fi Range Extender is made fast and easy because of its CD-less setup.  Now you can run the setup from a web browser even if your device does not initially have an internet connection and is on factory settings.  The steps below will guide you on how to set up your range extender using its browser based setup.
Before you start the setup process, make sure to have the following:
  • An active 2.4 GHz or 5 GHz Wi-Fi® connection
  • Wi-Fi name and password or security Key
Step 1:
Plug the Linksys RE6350 into a power outlet and wait for the light indicator to turn orange. 
NOTE:  Plug the range extender into a power outlet halfway between your router and the dead zone.  

Step 2:
Connect to the range extender’s default Wi-Fi name, Linksys Extender Setup, using a wireless computer or a tablet.  Make sure your wireless computer or tablet has a strong Wi-Fi signal from your router.

Step 3:
Enter "" or "" in a supported browser's Address bar and press [ENTER] to launch the Setup Wizard.

Step 4:
Make sure to read and agree to the End User License Agreement then click Start Setup.

User-added image
Step 5:
When prompted, select your Wi-Fi name.

NOTE:  In the example below, Office2016 is used.
User-added image
Step 6:
Enter your Network Password or security key then click Next.

User-added image

Step 7:
An _Ext suffix will be automatically added to your Network name.  If you would like to personalize the set Network namePassword and Security mode of your range extender's 2.4 GHz and 5 GHz bands, enter and select them in the fields provided.  Otherwise, click on Next.

User-added image

Step 8:
The Spot Finder page will appear.  This feature determines the signal strength between your range extender and your router.  If your range extender is too close or too far from your router, click the Find better location button and follow the on-screen instructions.

User-added image

Once you have found the best location for the range extender, click the Back link to proceed with the setup. 
User-added image
Step 9:
Create and confirm your admin password.  You can also add an optional password hint for easier recovery.  Click Save once done.

User-added image
Step 10:
Enter your Email Address to register your range extender.

User-added image
QUICK TIP:  To get special offers and updates from Linksys, tick the checkbox before you click Next.  If you have already registered your range extender, click Skip to proceed.

Step 11:
The range extender will go through a firmware checkup.  If a new firmware is available, it will proceed with the update.  Otherwise, it will proceed to the next step.

User-added image
Step 12:
Connect to the range extender’s Wi-Fi name and once the button labeled Next turns blue, click on it.

User-added image
You should now have successfully set up your Linksys RE6350 AC1200 Wi-Fi Range Extender.  You can click the Print button or take note of the settings.

Related Video:

Setting up the Linksys RE6350 using its browser based setup (VIDEO)

Was dit artikel nuttig?

Nog meer vragen?
Opnieuw zoeken